
C3 |
|
|
A very high performance, separate amplifier component system, with 'blue-halo' digital volume control with separate bass and treble control provides the power to drive a massive wooden enclosure 8" subwoofer and 2-way satellites each with 3" and ?" speaker drivers. A wireless remote control allows the entire system to be easily operated in a home or desktop environment
Acoustics:
- 8' subwoofer driver; vented housing with port on back wall; - 2-way satellite with 3' mid-range, and 3/4' tweeter unit with silk diaphragm; - Complete wooden structure for all speakers; 12mm MDF for sub and 9mm MDF for satellites; - Passive speakers with external amplifier Electrical: General: - Revolutionary voltage regulator circuitry to enable high VS for amplifiers and get best of the chips; - Digital volume controller - MCU for master volume, EQ control - Power output: RMS 2 x 8W + 30W Inputs: - RCA inputs for PC on back of external amplifier; - 3.5mm auxiliary inputs with higher sensitivity on both front panel and back panel of external amplifier; the one on back panel has higher priority of the two; - Key control switches between the two inputs; input indicators on front panel of amplifier are lit accordingly (same as C2) Outputs: - Speaker outputs on back panel of external amplifier, wire clippers; - Headphone outputs on front panel of external amplifier; higher priority than speaker outputs; Controls: - Master volume control on front panel of amplifier; - Input selector, "Function" (navigate recursively between master volume adjustment, treble adjustment and bass adjustment), and STBY/ON control available on front panel of amplifier (similar to C2); - Master volume ranges from 0 to 60, and bass/treble trimmer ranges from -9 to +9, 1 on each step; - Power On/Off switch available on back panel of amplifier; - IR remote controller with STBY/ON, master volume control, bass/treble trimmer, input selector. Cosmetic: - Large metal cabinet for external amplifier; - Large metal-looking damped volume knob; |
![]() |
